
BLUETTI Elite 30 V2
7.1Good · out of 10$289.99 -35% List price- Stated: 288 Wh · 600 W output
- Portable power stations

Product images: Amazon listings
The BLUETTI Elite 30 V2 ticks most of the boxes we care about: a 288 Wh battery, 600 W of output with 1,500 W for start-ups and UPS switch-over in 10 ms. It makes most sense for a tent, a beach day or a short outage; we rate it 7.1/10 from its listing.
| Brand | BLUETTI |
|---|---|
| Category | Portable power stations |
| Battery capacity | 288 Wh (stated in the Full listing title, not verified against manufacturer documentation) |
| Continuous output | 600 W (stated in the Full listing title, not verified against manufacturer documentation) |
| Surge output | 1,500 W, per the listing |
| Wall charge to 80 % | 45 minutes, per the listing |
| UPS / EPS mode | Stated, 10 ms switch-over |
| ASIN | B0F42HLLSC |
Full listing title: BLUETTI Elite 30 V2 Portable Power Station 288Wh 600W LFP Solar Generator
The two power stations closest to it on our rating, with a dated price.



Battery capacity stated in the listing, next to 600 W of continuous output. Plan on roughly 245 Wh at the outlet after conversion losses (our 0.85 rule of thumb).
What it has going for it
288 Wh battery. At a steady 100 W that is roughly 2.4 hours, after the usual conversion losses (our 0.85 rule of thumb). That covers phones, lights, a router and a laptop, not a fridge for long.
600 W continuous, 1,500 W surge. Continuous watts decide what can run at the same time; the surge figure covers the second a compressor or a pump kicks in. Fine for laptops, a CPAP, lights, a small TV and a 12 V cooler; not for anything that heats.
UPS, 10 ms. Leave the router, the PC or a CPAP plugged in through it: when the grid drops, the station takes over on its own, in 10 ms per the listing. Before you trust it with a desktop computer, read the manual on switch-over time.
At home, it can sit between the wall and the router and take over on its own (10 ms, per the listing).
At the campsite, 4.3 kg is a one-hand carry from the car to the pitch. It tops up from the car on the drive.
The seller states, word for word, in the BLUETTI Elite 30 V2 listing:
- Only 9.4 lbs lightweight, carry it anywhere during storms!
- Get a full 600W output—twice as much as others.
- Upgraded UltraCell tech & smart cooling system cut power consumption by 50%.
0-80% in 45 mins, 0-100% in 70 mins (battery-safe).
10ms ultra-fast UPS switch protects CPAP, laptops, routers—critical for home emergencies when power cuts suddenly.
Their words and their figures.

What the BLUETTI Elite 30 V2 listing names:
In the box, per the listing: AC charging cable, Car charging cable, User manual.
That is what the listing says comes with the BLUETTI Elite 30 V2. Check the box on delivery day, before the cardboard goes out with the recycling.
Check your own plugs and your load list against it before you order.

At the price on Nov 17, 2026, each stated watt-hour costs about $1.01. That puts it in the pricier third of the 48 stations and kits we have a price for.
The button opens the exact listing (ASIN B0F42HLLSC), where today's price, stock and seller apply.

Need longer runtime? The BLUETTI AC180 (9.4/10) states 1,152 Wh, about twice as much.
Kettle or microwave on the list? The EcoFlow DELTA 2 (9.3/10) states 1,800 W continuous.
Want the panel in the same box? The Jackery Explorer 1000 v2 + 200W Panel (9.3/10) comes as a kit, station and panel matched by the seller.
Our take
What we'd buy the BLUETTI Elite 30 V2 for is a 288 Wh battery, with 600 W of output with 1,500 W for start-ups as a bonus. No buyer reviews yet, so the BLUETTI Elite 30 V2 has to win you over on paper. The catch with this BLUETTI power station: not every watt-hour on the label is usable, so plan on roughly 85 % of them. We'd pick it if you need phones, lights and a laptop covered, not the fridge; otherwise, put it next to the BLUETTI Elite 10 Mini first.
At 4.3 kg (about 9 lb), it carries easily from the porch. Charge it to full from the wall (80 % in about 45 minutes, per the listing), then plug in a lamp and one thing you really rely on, so you know how it behaves before you need it.
If the router or the fridge already runs through it, the switch-over happens on its own (10 ms, per the listing). Watch the percentage for the first hour; it tells you more about your real runtime than any chart. Our rule of thumb says about 2.4 hours at 100 W.
It refills from the wall between outages, and from the car on the road. Know how you would top it up if the grid stays down for days.
Store it at the charge level the manual recommends and top it up every few months. LiFePO4 cells are relaxed about this, but every battery slowly self-discharges. Our storage guide has the routine.
Before you order the BLUETTI Elite 30 V2: check your load list, because 288 Wh and 600 W continuous have to cover what you run at once and for how long, start-up spikes included.
Read the label on each device (or its manual) for its watts, note which ones have a motor, and multiply by the hours you need them. Our watts vs watt-hours guide shows the arithmetic.
It states 1,500 W of surge. Anything with a compressor or a motor pulls a short spike when it starts; our refrigerator guide shows how to check a fridge or a freezer.
10 ms, per the listing. Fine for most routers and lamps; for a desktop PC or a medical device, read our EPS vs UPS guide and the manual first.
A battery station gives off no exhaust, so it can sit indoors within the temperature range its manual gives. Our camping power checklist helps if it is going camping.
How the BLUETTI Elite 30 V2 stacks up against the closest alternative, the BLUETTI Elite 10 Mini.
| Criterion | BLUETTI Elite 30 V2 | BLUETTI Elite 10 Mini |
|---|---|---|
| Our rating | 7.1/10 | 7.2/10 |
| Battery capacity | 288 Wh | 128 Wh |
| Continuous output | 600 W | Not stated |
| Weight | 4.3 kg | 1.8 kg |
| LiFePO4 | Stated | Not stated |
Pick the BLUETTI Elite 10 Mini if you want our higher-rated option (7.2/10), with less weight (1.8 kg); stay with the BLUETTI Elite 30 V2 for a bigger battery (288 Wh) and more continuous output (600 W).
We rate it 7.1/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.
Its listing title states 288 Wh of battery capacity and 600 W of continuous output. Watt-hours decide how long it lasts; continuous watts decide what can run at the same time. These are the seller's figures, so check them against the manual.
Roughly 2.4 hours: 288 Wh × 0.85 for conversion losses ÷ 100 W. Idle draw, cold weather and battery age move the real figure, and our power runtime calculator works with your own numbers.
Its listing states 288 Wh of stored energy, 600 W continuous (1,500 W surge), a 10 ms UPS switch-over, a wall charge to 80 % in 45 minutes, a LiFePO4 battery and only 4.3 kg. These are the seller's figures; how long it really lasts on your fridge and how loud the fan gets under load can't be read from a listing.
Your load list: read the label on each device (or its manual) for its watts, note which ones have a motor, and multiply by the hours you need them. Our watts vs watt-hours guide shows the arithmetic. The start-up spike: it states 1,500 W of surge. Anything with a compressor or a motor pulls a short spike when it starts; our refrigerator guide shows how to check a fridge or a freezer. The switch-over: 10 ms, per the listing. Fine for most routers and lamps; for a desktop PC or a medical device, read our EPS vs UPS guide and the manual first. Where it lives: a battery station gives off no exhaust, so it can sit indoors within the temperature range its manual gives. Our camping power checklist helps if it is going camping.
We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.